• clearly identifying the areas of the scaffold that have been handed over;
• clearly stating the maximum capacity of the loading bays and working platforms and the tie spacing;
• inspecting the entire area of the scaffold before it is taken into use. The scaffold inspection checklist given in Appendix B (Checklist 02: Inspection of Scaffolding in Use) or another suitable checklist may be used;
• removing “scaffold incomplete” warning notices from the finished scaffold;
• preparing a report of the inspection, e.g. using form GA3 “Report of results of inspections of Work Equipment for Work at a Height” (see Appendix C) or similar. A copy of the report should be retained on site; and
• identifying the person responsible for further modifications and inspections of the scaffold.

The following must be carried out prior to scaffold being used:
1. Checklist of scaffold inspected in use
2. Handover of scaffold to user
3. Complete GA03

See below

Ashview Consultants can come to site and perform the following:
Layout scaffold location to maximise use
Organise scaffolders and supervise works
Complete scaffold inspections on a weekly basis and sign off GA03